All articles

HPD Class A vs B vs C: NYC correction timelines

Class B versus Class C: start with the notice, not the repair description

When an owner asks about an HPD class B vs class C violation, the important difference is the level of hazard HPD recorded. Class B means hazardous. Class C means immediately hazardous. Class A means non-hazardous. These are HPD's classifications, not a contractor's assessment of whether a repair looks easy.

A Class B condition needs attention; it is not a minor issue simply because it is not Class C. A Class C condition requires particular urgency, but not every Class C violation has the same correction period. Heat, lead-based paint, mold and other specified conditions have different instructions.

This comparison focuses on deciding what to do next. For more background, read our Class C violation guide. HPD's Clear Violations guidance is the starting point for the official process.

The correction periods HPD publishes

HPD's Clear Violations and Penalties and Fees pages present the following correction timetable. The agency describes it as the time to correct from notice before civil penalties apply if sought in Housing Court. Do not confuse this table with the separate certification deadline or treat it as permission to leave an unsafe condition unaddressed.

Recorded violationMeaningHPD-published correction period
Class ANon-hazardous90 days from date of service
Class BHazardous30 days from date of service
Class C: lead-based paint, window guards, mold, mice/cockroaches and ratsImmediately hazardous21 days from date of service
Class C: self-closing doorsImmediately hazardous14 days from date of service
Class C: heat and hot waterImmediately hazardousNo time in HPD's table
Other Class C violationsImmediately hazardous24 hours from date of service

Source: HPD Penalties and Fees. That page also explains that heat and hot-water violations use the date the violation is posted at the building. Read the actual notice for its dates and instructions.

The practical answer to the HPD class B vs class C violation comparison is therefore not simply “30 days versus 24 hours.” Class C includes specific exceptions. Identify the class, violation description, order number and relevant hazard before planning work.

Correction and certification have separate clocks

Correction means fixing the cited condition. Certification means telling HPD, using its required process, that it was properly corrected. HPD says the Notice of Violation gives both the correction date and the certification date.

The governing NYC Administrative Code § 27-2115(f)(1) and (l)(2) supplies the certification periods missing from a correction-only chart:

CategoryCertification deadline after the date set for correction
Class A and Class B, under the general ruleNo later than 14 days after that date
Class C, under the general ruleNo later than 5 days after that date
Article 14 lead-based paint violationsNo later than 5 days after that date, including a Class B lead violation covered by that provision

These are certification periods, not extra time to finish repairs. The code permits delivery with acknowledgment or certified/registered mail with return receipt requested; eligible electronic certification is governed by the general provision and HPD's eligibility instructions. Do not turn these rules into a single deadline measured from inspection. Use the actual correction and certification dates printed on the NOV, particularly for specialized notices. Heat/hot-water payment-in-satisfaction uses a separate notice-and-payment process described below.

Look up the building and make a workable list

HPD directs owners to HPD Online to check violations and orders by property address. Use the link from its Clear Violations page, select the correct property and review the recorded violations. A complaint and a violation are not interchangeable records.

For each item, keep a working list of:

  • The violation identifier and order number.
  • The recorded class and complete condition description.
  • The apartment, room or common-area location.
  • The notice's correction and certification dates.
  • Any special repair instructions and required certification form.
  • The person arranging access, the repair provider and the submission confirmation.

Compare the online record with the mailed notice rather than relying only on a headline count. HPD notes that Orders to Repair and Repair/Vacate orders can appear as Class I; do not force those into the A/B/C timetable.

Special hazards: why the category matters

Heat and hot water

HPD's penalty table places heat and hot water in Class C and says “No time.” Its heat page explains that penalties can be sought from the notice's posting date until correction. This is not the ordinary “other Class C” category.

The HPD heat and hot-water page also describes a notice-specific payment-in-satisfaction option for certain eligible violations. Its reference to fixing the condition within 24 hours belongs to that option; it does not create a general penalty-free correction period.

For an eligible notice, HPD describes a $250 payment-in-satisfaction option: correction must occur within 24 hours of posting, and HPD must receive the Notice of Correction and payment within 10 days. Eligibility is stated on the NOV and depends on the property's heat or hot-water violation history. Section 27-2115(k)(3)(ii) supports this separate process. It does not excuse delayed restoration of service or apply automatically to every heat violation.

Do not use the ordinary daily penalty amounts on the heat information page to estimate current exposure: that page and HPD's Penalties and Fees page display different ordinary heat/hot-water penalty ranges. The latter expressly distinguishes violations issued before and on/after December 8, 2023. This guide does not quote a daily penalty range; use the applicable law and the particular notice rather than an older website figure.

Lead-based paint

HPD's lead violation correction page identifies the lead hazards it discusses as Class C. HPD's general correction table includes Class C lead-based paint in the 21-day group. Section 27-2115(l) separately provides 30 days to correct covered Class B lead violations and requires certification within five days after the correction date for covered Article 14 violations. Do not label every paint-related record the same way: the exact order and instructions matter.

The lead page requires specialized work and supporting documents. Its correction instructions include a sworn statement from the firm, the firm's EPA certification, dust-clearance laboratory results, and the sampler's training certificate and affidavit. HPD says a reinspection occurs before clearance after timely, valid documents are accepted. Painting over a condition and uploading a photograph is not a substitute for that process.

Mold

Mold can be Class A, B or C. HPD's indoor allergen guidance distinguishes mold area and location. Within a room in a dwelling unit, its table lists less than 10 square feet as Class A, 10 to 29 square feet as Class B, and 30 square feet or more as Class C. Common-area thresholds differ; use the official table rather than applying the apartment figures everywhere.

HPD also describes circumstances in which uncorrected or falsely certified mold violations are upgraded following the specified process. Repair the underlying cause and follow safe-work instructions, not just the visible surface. Certification forms and supporting documents vary with building size, class and violation history.

Window guards

HPD's correction table includes Class C window-guard violations in the 21-day group. Its window-guard page explains approved installation requirements, covered apartments and tenant requests. Use the actual violation to identify the window and defect; a window-guard violation is not necessarily resolved by installing an arbitrary barrier.

HPD states that approved guards are required where a child age 10 or younger resides, and must also be installed when a tenant requests them in writing even without a resident child of that age. Covered windows include first-floor bathrooms and windows opening onto balconies or terraces; the page also addresses common-area windows. Exceptions include windows opening onto fire escapes and first-floor windows that are required secondary exits in buildings with fire escapes on the second floor and above. Preserve required escape routes rather than installing a guard indiscriminately. HPD identifies more than 4½ inches of open unguarded space as a reason to complain about installation. These points are not a substitute for the approved device's installation requirements.

Certify after the work is properly completed

HPD accepts electronic and paper certification, but the submission method depends on eligibility and violation type. Its eCertification page describes enrollment for eligible registered owners and managing agents. Check that the building's required registration is current and that the person submitting is authorized.

The Clear Violations page expressly excludes lead-based paint, mold and pest violations from eCertification. Do not assume that access to an online account makes every listed violation eligible. Use the specialized instructions where required.

For paper submissions, HPD identifies the certification document mailed with the notice and replacement forms for particular circumstances. The general non-lead/non-heat/non-pest form calls for the original NOV identifier, violation number, repair information, a signature and notarization. Heat, lead, mold and pest matters have their own instructions or forms.

Our certification forms and timing guide covers the filing workflow in more detail. Here, the comparison point is simple: a different hazard class or condition can change both the repair timetable and the documentation route.

What evidence should you keep?

HPD's general instructions require truthful certification of completed work and identification of the repair information requested by the form. They do not establish a universal requirement to submit photographs and invoices with every certification.

As a practical recordkeeping precaution, retain the completed forms, submission receipts, repair records and any condition-specific documents. Do not present optional photographs as HPD approval, and do not omit required affidavits or testing because you have an invoice.

For mold, HPD requires owners of residential properties with 10 or more units to hire a New York State Department of Labor-licensed assessor and remediator, completely independent of each other, whenever mold exceeds 10 square feet. HPD requires copies of the contractors' DEP filing receipts with certification of Class B and Class C mold violations in buildings with 10 or more units. Use the mold form matched to the building and classification; pests have a separate certification form. HPD also directs that pesticides used to eradicate pests be applied by a New York State DEC-licensed pest professional. The lead documents listed above follow a separate process and cannot be replaced by the mold paperwork.

If certification is late, missing or false

HPD says failure to correct and properly certify can lead to civil penalties, inspection fees and enhanced enforcement. Immediately hazardous conditions may be addressed through the Emergency Repair Program, with the property billed for the work. The program is not a substitute for the owner's repair obligation.

HPD may audit a certification by reinspection. Tenants are notified of certifications and can challenge them, triggering an audit. If the condition is found uncorrected after certification, HPD describes a False Certification status: the violation remains open, and civil penalties can follow.

Its Certification Watchlist page describes additional enforcement for selected properties. Its Housing Litigation page describes court actions seeking correction and civil penalties. Neither a certification receipt nor a contractor's promise guarantees dismissal.

For late or falsely certified violations, HPD says a Dismissal Request reinspection may be required, involving an application and fee. That later clearance route is not an extension of the original dates. For the enforcement sequence, see our guide to how an HPD violation becomes a fine. No dollar amount is estimated here.

Postponements and professional help

HPD directs owners to the back of the notice for postponement requests for some violations. Its lead page describes requests based on specified difficulties, including technical problems, obtaining materials, funds or labor, and access. A request is not automatic approval.

Under § 27-2115(c), the general postponement showing must establish prompt action and an inability to finish because of the specified obstacles. Ordinarily it must be made within the correction period; for immediately hazardous violations that provision requires the showing before close of business on the next full day HPD is open following the correction period. HPD must record a signed, dated written decision stating its reasons. This is not a recommendation to wait until that cutoff.

Lead has a separate rule in § 27-2115(l)(1): request relief within the notice's correction period. An initial postponement may be up to 14 days; one additional postponement of up to 14 days may be granted for the authorized reasons if the condition has been stabilized. The code also authorizes rules for longer postponements involving substantial capital improvements; this guide does not assert eligibility for that separate route. Obtain HPD's written decision and use the resulting notice instructions for the correction and certification dates. Filing a request alone does not establish that HPD granted an extension.

Use qualified specialists when HPD's instructions require them. The indoor allergen page specifies independent licensed mold professionals for covered work based on building size and mold area; lead correction has separate EPA-related requirements. Consult an attorney about litigation, disputed service, contested classifications or access issues rather than making legal assumptions from this comparison. Our NYC laws guide provides related building-rule context.

Common mistakes to avoid

  • Treating every Class C violation as having the same period.
  • Using the inspection date instead of the notice's applicable service or posting date.
  • Completing repairs but missing certification.
  • Certifying before the cited condition is properly corrected.
  • Using a general form for a specialized hazard.
  • Assuming a postponement request or submission receipt closes the violation.

The useful comparison is the recorded class plus the specific condition and notice. Put those together before scheduling work, choosing a certification method or deciding that the record is resolved.

For related building guidance, see our NYC local laws guide.

Want this handled for you?

Run a free scan of your building or call us and we’ll take it from there.